Tiscali / TalkTalk User

DavidC · 29-05-2005, 06:55 PM

A question for any Voyager 2100 users.
I am having some problems and have emailed BT about them.
I do not have a wireless LED on, BT shows this as a fault, and I have had to re-set and re-boot after losing everything.
I also have a variable network speed of 8 - 54 Mbs.
I only have one telephone and have tried different filters.

A thing I noticed concerned the Firmware Version supplied as default.
This is 2.14.02.15_a023g1 and is shown on the BT website to be AOL only. I have never been with AOL (f2s is my first broadband)
The production Version should be 2.14.02.06.
The latest is a BETA at 2.18.01.13
So do I downgrade or go to a BETA.
And all at my risk as BT will take no responsibility.
Could anyone check for the firmware version they have please.

taff007 · 30-05-2005, 09:03 PM

Hi David,

I have version 2.14.02.06. I've used it on wanadoo for about 5 months and for the past 3 weeks on f2s.

My wireless light comes and goes with no real pattern. It first went out after a couple of days and I was going to send the router back, but a quick reboot and it came back on. Performance rarely below 54.0mbps now so it makes no difference to me whether the light is on or not.

I did have problems with the free filters though. Both of the BT ones included in the pack gave a lot of noise on the line, and when one of them was connected nobody could ring in. I think I chucked them and went back to the old filters in the wanadoo startup pack.

Apart for those issues no problems so far

29-05-2005, 06:55 PM	#1
DavidC Tiscali User Member Join Date: Apr 2005 Posts: 303 Thanks: 0 Thanked 0 Times in 0 Posts	BT Voyager 2100 A question for any Voyager 2100 users. I am having some problems and have emailed BT about them. I do not have a wireless LED on, BT shows this as a fault, and I have had to re-set and re-boot after losing everything. I also have a variable network speed of 8 - 54 Mbs. I only have one telephone and have tried different filters. A thing I noticed concerned the Firmware Version supplied as default. This is 2.14.02.15_a023g1 and is shown on the BT website to be AOL only. I have never been with AOL (f2s is my first broadband) The production Version should be 2.14.02.06. The latest is a BETA at 2.18.01.13 So do I downgrade or go to a BETA. And all at my risk as BT will take no responsibility. Could anyone check for the firmware version they have please.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BT Voyager 105 - installation/connection problems	pete.c	Freedom2Surf Broadband	3	11-05-2005 02:41 PM
RWIN settings On BT Voyager 2100	Oscar	Freedom2Surf Broadband	9	06-04-2005 09:48 PM
BT Voyager 240 ADSL modem (from f2s)	Ralph Bacon	Freedom2Surf Broadband	14	10-02-2005 06:38 PM
BT Voyager settings	Liam	Freedom2Surf Broadband	4	23-01-2005 02:13 PM

Tiscali / TalkTalk User

Advertisement

TalkTalk User Links

TalkTalkUser Partners

30-05-2005, 09:03 PM	#2
taff007 Tiscali User Member Join Date: May 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Hi David, I have version 2.14.02.06. I've used it on wanadoo for about 5 months and for the past 3 weeks on f2s. My wireless light comes and goes with no real pattern. It first went out after a couple of days and I was going to send the router back, but a quick reboot and it came back on. Performance rarely below 54.0mbps now so it makes no difference to me whether the light is on or not. I did have problems with the free filters though. Both of the BT ones included in the pack gave a lot of noise on the line, and when one of them was connected nobody could ring in. I think I chucked them and went back to the old filters in the wanadoo startup pack. Apart for those issues no problems so far

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)